SA3000 - VoIP Audio Node

The SA3000 is a hardened, IP to audio device that provides line level audio to Public address inputs. The IP side utilizes VoIP (Voice over Internet Protocol) communications and SIP (Session Initiation Protocol). The SA3000 is set up via a web browser or is remotely supervised, tested and set up using an Emcom Systems’ EmVista Maintenance Station.


  • Wide Operating Temp Range
  • 3 Port IP Switch for Daisy Chaining
  • 2 Year Warranty
  • Remote Programming and Volume Adjust Via Web Browser or EmVista Maintenance
  • Auxiliary Contact Closures



Dimensions: 7” x 7” x 3.5” D
Housing: 116 Ga. (.060”) Brushed SS
Weight: 3 lbs.
Connectors: 2 RJ-45, 1 Audio Out
2 Aux. Contacts, 1 Power
Operating Temp: -30° C to +60° C
(-22° F to +140° F)
Power: 3.4 Watts at Full Volume
9 to 54 VDC, 48 VDC POE
or 110 - 240 VAC 50-60 Hz
2 Aux Contacts: 120mA-250VAC Rating,
Freq. Response: 300Hz - 15KHz
MTBF: Greater Than 90,000 Hours
Last Updated: 10/29/2015
The dynamic nature of this product design dictates that the information contained in this document be subject to change without notice. Emcom Systems assumes no responsibility for errors and/or omissions contained herein.